Sunday, December 4, 2011

Very Simple Creative Paperclay® Ornaments

Very Simple Creative Paperclay® Ornaments

Ever really want to create something but your time is greatly limited? Welcome to my life! Ha! When life gets busy, it's time for me to get really creative and figure out how to make simple project which take up little time but are oh so fulfilling. Here's an ornament project that is so simple, even the kiddies can get involved!

What You'll Need
Creative Paperclay®
Rolling Pin
Non-stick craft mat or wax paper taped on work surface (to prevent sticking)
Cookie Cutters (I used cutters shaped like mittens)
Toothpick (not pictured)
Colored Pencils and/or crayons (not pictured)
Sharpie Markers or any magic markers you have (not pictured)



What To Do
1.  Roll out a good-sized lump of Creative Paperclay® to a 1/4" thick on your non-stick craft mat.

2.  Take your cookie cutters and press into the Creative Paperclay®.



3.  Remove excess Creative Paperclay® from your cut-outs. Make a hole for a ribbon or string with the toothpick.



4.  Carefully pick your cut-outs up and place them on a baking sheet. Bake in a toaster oven or full-size oven at 220 degrees for 10-12 minutes. Flip over and bake for another 6-8 minutes. Cut-outs should be hardened, but may be a little bit pliable.

5. Decorate with Sharpie Markers, colored pencils, crayons, paints, glitter, beads...whatever your heart desire! Enjoy the fruits of your labors!!!


Sunday, October 23, 2011

Today Marks the Start of My Second Term on the Creative Paperclay® Design Team!!!


Hello! My name is Marissa Fratoni, welcome to my artful blog!!! Today marks the start of my second term on the Creative Paperclay® Design Team!!! I am soooo excited...I loved every minute of being on the first team and just had to be a part of the second. I am so fortunate to have been accepted as a member for a second time! Soo...a little about myself. I wear many hats in my life including that of an operating room nurse, licensed massage therapist, yoga practitioner, and artist. I live in Massachusetts. We're enjoying the gorgeous fall foliage right now and looking forward to the big holidays at the end of the year. However, if the snow would like to take a vacation this year, I wouldn't mind!

I am fortunate enough to be married to my best friend, Mark who also wears many hats. Between the two of us, we have several professions covered. We are kitty parents to the most loving cat in the world. His name is Wylie...we adopted a cat because they are independent, low maintenance creatures. He is low maintenance, but he's more like a needy bundle of purring love rather than an independent creature! Oh well, there are far worse things than a loving cat!

I specialize in making dolls, ornaments, magnets, cake toppers, and fun little bookmarks. I love to sculpt and work with Creative Paperclay® and any products made by this lovely company. I also love to paint, sew, crochet, and come up with as many uses for Creative Paperclay® as humanly possible. Without my artwork and yoga, I would be a very stressed person! But I have these incredible outlets in my life and really enjoy every minute of it! Life is good! Thanks for visiting my blog...Check back here every month for new projects and tutorials! And don't forget to check out Creative Paperclay®'s blog where the Creative Paperclay® Design Team will post fantastic projects and in-depth tutorials! I learn so much from this team of incredible artists...You will too!!! 

Creative Paperclay® Blog:
http://creativepaperclay.blogspot.com/

Creative Paperclay® Website:
http://paperclay.com/

Mark and Me


The Wylie Cat

Cloth and Clay Dolls Made with Creative Paperclay®


Wednesday, October 5, 2011

Creative Paperclay Wooden Base Art Doll

Have you gone to a flea market, yard sale, or craft store and purchased items which you had no immediate use for, but knew you just had to have said item? I am certainly guilty of this habit, but I love buying these items and storing them in my craft "pile." When an idea hits, bam! I've got those random items that I need! So this project is based on some wooden pieces I had purchased a while back at a flea market. They are unfinished table chair/table leg ends. Feel free to use unfinished wood candle holders, blocks, boxes, etc.

What You'll Need
Creative Paperclay
Wood pieces for base
Styrofoam ball or aluminum foil ball
Non-stick craft pad or wax paper taped to work surface to prevent clay sticking
Cup of water for sculpting
Sharp pottery tool or toothpicks (not pictured)
Acrylic paint, paint pens, sharpie markers, etc. (not pictured)


What To Do
1.  Take your styrofoam ball and cover with paperclay. Use dabs of water to smooth the clay over the styrofoam (or aluminum foil ball.) Place the ball on top of your base. Add paperclay to both the base and the ball to adhere the two pieces together. Smooth and blend the paperclay into the base of the ball and toward the bottom of your wood piece. Creative Paperclay adheres remarkably well to wood. Feel free to cover the entire wood base with clay, or not...but do cover enough of the base to stick little paperclay arms to it!



2.  This is a good time to press eye sockets into your doll's face. Set aside.

3.  Now it's time to make the arms. Take a ball of paperclay, roll it into a snake. Fold the snake in half and cut at the crease. Hold these little snakes up to your doll to make sure they are the right length for arms. 




4.  Smooth the edges of your little arms. Pinch one end of each arm slightly, and round the other end. The pinched end will be your doll's hands, the rounded will be your doll's shoulders.


5.  Attach the arms to your doll's body with a dab of water. Creative Paperclay adheres to itself really well, but you may need to blend the shoulders in just a bit.
  


6. Now it's time to give your doll it's features! This is my favorite part of the sculpt! If you haven't already, press your thumbs into the head for eye sockets and eyebrow ridges. Take a tiny bit of paperclay and make a pinch nose. Add a leaf-shaped lump of clay below the nose to sculpt lips.


7.  I typically set the doll aside at this point and allow it to dry a bit. This makes adding hair and other features easier and prevents you from messing up the parts you have already sculpted. Set the doll aside for a few hours in a warm, dry place and it'll be ready for hair!

8. Make anywhere from 4-10 tear-shaped paperclay pieces. Blend these pieces into your doll's head one at a time. I used four on this doll's head. Feel free to add as many as you like! I find 10 teardrops works well for bigger hair!









  9.  Now take your toothpick or sharp tool and draw lines in the clay in the direction or style you want your doll's hair to be!


10. Allow your doll to dry for at least 24 hours in a warm, dry place. Once dry, get out your paints and have a blast! I typically sew or glue fabric to my dolls for clothing and accessories. I haven't had a chance to do that with this doll yet, but check back here soon for updated pics of my wooden base doll and a tutorial on how to dress her!!!


Hope you enjoyed this tutorial! Please be sure to visit the Creative Paperclay Website:  http://creativepaperclay.com/

Want more ideas on how to use Creative Paperclay? Visit the Creative Paperclay Blog:



Monday, September 12, 2011

Help to Remember the Summer With Your Own Sun Ornament!!!

I love the autumn, but I cannot believe how fast this summer has gone by! I decided to make some ornaments that will remind me of the summer sunshine. I hope these ornaments do the same for you!

What You'll Need
Creative Paperclay
3" Styrofoam Ball
12 gauge jewelry or gardening wire
Butter knife or other sharp object able to cut through styrofoam
Non-stick craft mat
Acrylic paint (not pictured)
Embroidery floss (not pictured)


What To Do
1. Take the styrofoam ball and cut it in half.


2. Take some paperclay and cover one half of the styrofoam ball. Put the other half of styrofoam ball away for another ornament or project. Or, cover both and feel free to make an ornament buddy...like a moon!


3. Add bits of clay to the flat part of the covered styrofoam to build a face. I start with the nose and work my way out. Small dots of clay and teeny tiny snakes of clay work really well for building facial features. I use my fingers for most of the sculpting, but sometimes a toothpick is really helpful in placing tiny features onto a face.


4. Add the sun ornament's "rays" by sculpting 9-12 triangular shapes out of the paperclay. Make sure these pieces have some length so that they can be blended into the back of the sun.

5. Repeat this process until the sun has all of its "rays." If you have fumble fingers or are dislike doing things more than once (like me), then I suggest allowing your sculpted sun's face to dry before continuing with the ray application process. Very often, some of the face will be smooshed and will require a few quick fixes during the ray sculpting process.

IMPORTANT: If you prefer your facial features to dry completely, please skip to step 6 before you pop your ornament in the oven or set in on the windowsill!

6. Take 5 inches of your 12 gauge wire, fold it in half allowing for a loop at the top. Twist the wire and push it into the back of your sun ornament. Make sure it is nice and secure inside the styrofoam. Allow your ornament to dry completely, or pop it in a 225 degree oven for 15-20 minutes. (Every oven is different, keep a very close eye on your ornament or you may have a blown up alien-looking ornament instead!)


7. Once your sculpted ornament is dry, it's time to decorate it! I use acrylic paints...you can use whatever your heart desires!!!


8. Once your sun ornament's paint is dry, take some embroidery floss (or yarn, strong thread, whatever you have on hand) and string your new sun ornament up. I like to hang mine from a ceiling fan or door knob. My sun ornament reminds me of summer all year round! Hope it does the same for you!!!